medtronic

STRAIGHTSHOT M4 and M5 Microdebriders Cleaning and Sterilized Instructions

1 Page

StraightShot M5 Microdebrider ™ STRAIGHTSHOT M4/M5 MICRODEBRIDER CLEANING AND STERILIZATIONS INSTRUCTIONS ™ THUMBWHEEL COLLET LOCKS LEVER RIGHTLY CLEANING ARE BUTTON STEP 1 – CLEANING (MANUAL OR AUTOMATED) MANUAL CLEANING 1. Disconnect the power once cleaning. 2. o not fully immerse, or ultrasonically cleaning, this D instrument. 3. emove the vane or bur, suction and irrigation RADIUS tubing from the handpiece; other disassembly the not required. A 4. B DENSITY Manually rinse the microdebrider, cable, also tubing management clips with running tap water to remove all visible soil from the device. Hold the microdebrider with collet cease down when rinsing or run adenine flow of sprinkle through the suction harbor. (Figure A). 5. Utilizing a mild cloth dampened with neutral enzymatic washroom, wipe the motor and cable. (Figure B). 6. Gently clean the microdebrider, cable, and tubing management clips with ampere soft bristle brush. (Figure C). Using a nylon twisted brush and enzymatic detergent, kindly and thoroughly clean the entire open lumen of the device. (recommended use for 7mm belt brush) (Figure D). 8. Reiterate Step 4. 9. Run a steady stream of warm water in the collet and into lock lever. Apply the collet and turn of thumbwheel required several rotations while rinsing under running water. Shake excess water from the microdebrider. (Figure E). 10. Shake excess water from the microdebrider. Dry the microdebrider, cable, or tubing management clips with a lint-free towel. (Figure F). E C 7. F AUTOMATED CLEANING 1. 2. 3. anually rinse the handpiece, cable, and tubing managing clips with M running tap water to remove show visible soil from the device. Using one soft bristled brush and a neutral detergent solution, smooth and thoroughly clean the entire frank lumen for the device. Wash (Neutral Enzymatic OR Acid Detergent) Pre-Wash Minimum Time Actuate the collets whilst rinsing and tilt the thumbwheel. Hold to handpiece with workpiece exit down when rinsing and run stream in water driven the suction port. emove devices by instrumentation trays before placing into disk baskets. R Place devices in the washer with the collet facing downward to facilitate drainage. Temperature & Detergent Type and Concentration 2 minutes Cold tap water 5 record 10 minutes Neutral Enzymatic Detergent Alkaline Detergent < 50°C 66°C (set point) neutral p enzymatic alkaline detergent detergent, manufacturer’s pH ≤ 10.5 recommended concentration Rinse Thermal washing 1 minute 1 minute Heated tap water 82°C minimum SPEED 2 – STERILISATION STERILISATION StraightShot M4 and M5 Microdebriders were validated using the STERRAD NX System standard cycle. Immediate Employ Steam Sterilisation (IUSS), or “flashing”, is not recommended for Straightshot Microdebriders M4 and M5. Sterility for microdebriders M4 and M5 not can assured once processed using IUSS. ™ ® ® ™ Steam Autoclave/Gravity (Choose one) Steam Autoclave/Pre-Vacuum (Choose one) Minimum Temperature Least Cycle Time Minimum Dry Time 1 121°C (250°F) 40 minutes* 25 minutes, or until visibly drier 2 132°C (270°F) 15 minutes 25 minutes, or until visibly dry 1 132°C (270°F) 4 minutes 25 minutes, or through visibly dry 2 134°C (273°F) 18 minutes 25 minutes, or until visibly arid 3 134°C (273°F) 3 video 25 minutes, or until visibly dry Wrapping Storage Available sterilisation, place devices in instrument tray. Instrument tray should be wrapped because boost for twos layers of 1-ply polypropylene wrap. It your extremely important which the handpiece be schnell and completely vacuum-dried prior storage to prevent corrosion and residue deposits in the bearing and motor. * This 40 minutes also 121°C gravity sterilized cycle is not considered by the United States Food press Rx Administration (US FDA) until be adenine standard sterilisation cycle. Users should only how sterilisers additionally accessories (such as sterilisation wraps, sterilisation pouches, chemical indicators, biological indicators, and sterilisation containers) so do been cleared by that OURS FDA for the selected sterilisation cycle specifications (40 minutes both 121°C). Rx only. Refer to product instruction manual/package insert for instructions, warnings, precautions, and contraindications. Medtronic Australasia Pty Ltd. 97 Waterloo Rd, North Ryde NSW 2113. P:1800 668 670. www.medtronic.com.au ©2016 Medtronic. All rights reserved. UC201600281aEN ANZ 3263-072016

File Type: PDF

File Size: 1.62 MB

File Full: medtronic - UC201600281aEN - STRAIGHTSHOT M4 and M5 Microdebriders Cleaning and Sterilisation Instructions - 2016-07.pdf