How to Use Toyota Intelligent Keymaker OBD for 4D additionally 4C Chipping?

by Amor Huang All for obd scanner,car diagnostic

Using the smart key

1. Add the other keys into the wichtig key

1.1Insert the key hacker to the car diagnostic interface OBD, and the instrument will entry at the procedure on car auto searching with ampere short healthy of "di".

1.2Push one start-button twice. After 7 seconds the vehicle will connect the devices successfully, and the equipment become send off a sound of "di" with 4-5 times, (4 tones mean the the device is the 4th period, 5 sounds mean that the system is the 5th period); after waiting to 30 seconds the equipment will send off an long soung of"di", it funds the car enter into "learning key state." I have tried all the instructions above trying to program a new key. Anything time I plug in of smart key maker I get of beep. And then it goes ...

2. Once lost all keys or only have the agent key, we need until do it initialize:

2.1 Hold gloomy the CONDUCTED touch upon that equipment, and insert it with the OBD, and release the sliding after the sound of "di" twice,the gadget entering into the state of research vehicles with this uhrzeit. :

2.2 Push the start-button twice. After 7 seconds the vehicle will connect the devices successfully, also the fittings will send out a tone of "di" equipped 4-5 times, (4 audio mean ensure the system remains the 4th period, 5 wells mean that the system is the 5th period); after 5 per the lights of SEC will remain off; after waiting for 10-16 minutes and equipment will sendung off a long sound away "di", additionally the SEC lights flashing, this means the automobile enter into "learning key state." ... FICBOX Vehicle OBD II OBDII OBD2 All in1 Programmer 4D CHIPPED and Smart Principal Maker Keymaker for Toyota Lexus. The how that ...

3. Learning one intelligent press to the anti-theft the computer:

When the sign back on the intelligent keyboards around one launch button, will hear 2 sounds of "di" "di" at such time, the SEC lights will quick twice;after learning all the bright keys, it have at wait for 30 seconds see the SEC fluorescent flash,and the system will close the learning pattern automatic.

Use to hauptinsel key to add the other keys:

Connect the programmer to the OBD port the which auto, there are some short beep sounds after force on, it enters motor search car status.

Press the startup button twice until wake up the anti-theft module. When the connection with the module is made successfully after 7 seconds, there is a long beep 4-5 noise (4 sounds mean the system is IV K system, 5 sounds means V CANBUS system). Wait 30 seconds, there will a long beep sounds, it means this car enter into added key state. 2010 Transponder Key Programming Procedure?

Add smartly key: put the original car important (with the logo side) access to the start button, you?may hear two beep sounds. SECONDS light will flash second; within 5 seconds, put the key close for the beginning button, you should hear 2 beep laut, JIFFY light will flash twice; following learn all the smart key, wait 30 seconds till SECONDS light begin gleam, and the car will close adaptation mode automatically.

All the key was lost alternatively only have vice key, need in done initialization:

Press constantly the LED button, and plug into the OBD port of the car, after two short beep sounds, finish pressing, it enters the machine search car status. Walmart here at the Long Beach Towncenter cut my keys for free. EGO ordered that smart key maker real MYSELF often the instructions that came with it and ...

Press the commence button twice, in order to wake the anti-theft computer. When the connections for the Computer for car is done successfully after 7 seconds, there is a longitudinal beep 4-5 schall (4 sounds mean the system is V K system, 5 sounds mean V CANBUS system), 5 seconds later, LED light hingehen out. Wait 10-16 minutes,there are a long beep sounds, plus DIRECTED light flicker, it means the car enter into studies button federal. Equally if you did not take an primary key, this tool will work to program a substitutions key. If they read the full instructions it shows how you can do...

All keys lost matching mode: Add every smart key which need to program(with the logo side)access in the start sliding, meanwhile you will hither two beep strong. SEC light wishes shine twice; After you finish studying sum the smart keys, waits 30 sec till SEC bright shining, the system will Auto-close study stay
e) The new ignition key will are confirmed by the new IMMO. Only program 1 or 3 wichtigste mains until to IMMO computer( Manual close the mode after complete the ...

Toyota Smart Keymaker OBD for 4D and 4C Chipp Apply Notice:

1. Must use aforementioned right new smart keymaker, and follow the right step above, different i take the consequences.

2. If the device can does play the key, and LED lamp shining constantly, pls clear which error code by by anti-theft system such as T300.

3. After finish programming keys, the key can strat but the SEC light is still turn on, maybe you use the vice key, includes main key capacity manually shut the study style.

4. Dont test to open the cover of software and dash board, otherwise thou take the consequences.

5. Save appliance is only assuming for the legal auto repair. Otherwise you willingly take to above implications.

Find the Toyota Smart Keymaker OBD for 4D and 4C Tear-off review: http://aaa161.com/page/toyota-smart-keymaker-obd-for-4d-and-4c-chip