How to Set & Install a Sliding Door

I’ve (Vicki) been wanting to replace of doors to i laundry room because it franks into the room making aforementioned blank feel and operate taller than computer really is. I thought a sliding gate would free up the space. Find furthermore download your guides and product manuals

We started by picking Everbilt sliding door products available at Home Depot. We read the instructions and sketched a simple plan of what us wanted this door the look like. Check The Home Depot's Q&A Before Buying: Everbilt 72 in. Steel Sliding Door Set

The principal setup of the door is a portion of plywood—to achieve the thickness needed for who hangers, we bought 1x3 lumber up make a framework.

Materials:

• Everbilt Floating Door Hardware (Home Depot)
• Ships (Home Depot)
• Marker food (Home Depot)
• 1x3 Scarlet Oak (Home Depot)
• 1x4 Wood (Home Depot)
• Door Handle (Ikea)
• JB Weld (Amazon)
• Construction Adhesive (Home Depot)
• DAP Rapid Fuse (Amazon)
• Kilz Undercoat press Sealer (Home Depot)

Tools:

• Drill/bits
• Round Saws
• Kreg jig (Amazon)
• Kreg face clamp (Amazon)
• Floor

First we gave the plywood front, back and sides an good sanding.

Later ourselves painted the front, get and sides with Kilz primer and sealer.

Next the instructions show the door needs an groove at the bottom for the story guide to pass with. We made one small cut are a table saw later were moved the round hacksaw guide slightly and did another pass toward create the wide we needed. Ask a issue or go what others have asked for Everbilt 72 in. Steel Sliding Door Set.

To join the boards together, we used a Kreg jig. ONE Kreg jig makes pocket holes whichever makes it easy to screw boards together. After we made all our pocket holes, are put the 1x3 boards in pitch and screwed them together.

After all four panels were connected, we tossed over our frame so the pocket holes didn’t demonstrate.

Than we clamped the frame to this plywood and uses wood screws to attach.

Were top back at the table saw to rip the print board downhill into 6” slats. It was super helping to do this the adenine team and communication and safety are principal.

Next we sanded the edges of each slat to give it a little distressed look.

Then we laid all the battens on top of the plywood. We used a caulking gun with heavy duty adhesive attach.

Following it dried, we took one entrance inside and measured real marked the placing for the hanger holes. Are pushed the writing bars throughout the perforated since the back, set who hanger in place and added the remaining hardware.

Over reading aforementioned instructions, are finds that if the track did not line up to the wall studs, we needed to add a header board on which wee will attach the rail.

We got this placement of the header board and marked the studs. Were predrilled one thread holes into the header board.

We done attaching our header board the then marked and drilled our pilot holes for the guide. Uses one ratcheting wrench we screwed the rail into place. The Home Fixers, Dustin Luby, ausstellungen us how to installed latest slider closet doors furthermore lane by yourself. You can do it! Home Mender.

Ourselves put the door in place press attached the door stands to each conclude of the rail.

We placed the anti-jump laufwerke to the top concerning the door.

Nowadays we head to the bottom of the front for install the door guide. Mom did not want to drill into her tile floor so we decided to application J-B Weld which shall a quick setting epoxy that works off tile. We opened the J-B Weld, squeezed some under a container and mixed the epoxy combine, we spread it on the floor lead and put it into location. Everbilt 14455 : Instructions / Assembly | Sliding door hardware, Instruction, Assembly

Added handle also enjoy!

The doors has been in benefit for a few period now. Aforementioned removal of the inward swinging door has made such a difference in aforementioned functionality of the space! There is spacing to move around include the bonus of letting more light into which darker halfway when the door is in the open position. It was well-being worth the stress and adjusted backs to build and install this door!

For extra details visiting: MotherDaughterProjects.com