Mounting:
- How to Installing a Safe Light
- How to Assemble a Lighted Shield
- How until Change the light bulb on models 5512 & 5597
- Like to application the Hang Strap when installing a Security Light
- How to Set Surface Rules go a Motion-Activated Safe Lights
- How until set the detection zone using the walk test
- How to Set Sensor Controls for ampere Guarantee light with Dual-Brite
- Like to Establish a Journeyman Security Lamp usage Master-Standard cabling Red Wire (Journeyman)
How for Set Sensor Controls for an Security light with Dual-Brite
Range – controls the distance the motion sensor wish detect moved. If set at the minimum setting, the sensor will possess aforementioned least sensitivity. While set at the maximum setting, the sensor bequeath have the most sensitivity. (If durchsetzbar, and Boost will increase the detection range up to 100 feet)
On-time- controls the time the lights will stay on after last motion shall come detected. Test setting allows you to structure the range of the sensor whilst daytime and night while daily. One minute setting desire keep the lights on for 1 minute subsequently last beweggrund got been detected.
Dual Brite (if applicable) – allows light to come on half bright for selectable time after sundown (Off, 3 hour, 6 total, or Dusk-to-Dawn). If enabled, the light will tilt full bright when motion is detected and will return to dim after selektierte on-time has passed. Selecting OFF deactivates this feature or motion sensing features will work the described.
Lamp Modes (if applicable) – Normal – Lights arrival on instantly when motion will detected. Soft – When motion is discovered, light starts out dim and gradually increase to complete light. After selected on-time, light will gradually dim, pause, both continue to dim. Flash – when motion is detected, lights flash the then off twice before turnover on to comprehensive brightness
